Residential Complex “EVRYKA” BUILDING #16 ,GOLOSIIVSKIY DISTRICT       av.Academic Glushkov, 6 in Kyiv  Choose the house

Number of sections and floors:
2 sections; 24 floors (24-storey-building)
Exterior walls:
  • prefabricated ferroconcrete, 160 mm thick with exterior insulation system on external ventilated facades;
  • loggias - 3-layered, 300 mm thick,painted;
  • between sections (deformation seam)- 3-layered, 300 mm thick.
Interior walls:
Prefabricated ferroconcrete, 160 mm thick.
Partition walls:
ferroconcrete, 80 mm thick.
Overlapping:
Prefabricated ferroconcrete, 160 mm thick.
Loft (attic):
cold
Roof:
Roll coating
Rainwater drainage:
interior
Characteristics of fire prevention measures:
  • Lighting of stairs - daylight, at night time –  electric;
  • Antismoke protection – according to the project;
  • Installed fire extinction pipes on every floor and in bathrooms in the apartments(FEP)
  • Fire extinction automatic system
Number of elevators:

3 on each section, which are:

  • 2 elevators with 400 kg capacity ;
  • 1 elevator with 1000 kg capacity (also for firemen transportation).
Floor height:
2,80m ( floor to floor).
Additional interior works:
  • Entrance door to the apartment –  metal,shockproof;
  • Interior doors in the apartment – wooden frame MDF lined;
  • Windows and balcony doors – plastic with double glazing.
Interior finishing works in the apartments:

Rooms, kitchen, living rooms , halls and hallways:

  • floor – oilcloth;
  • walls –  wallpaper;
  • ceiling –  paste whitewash.

Bathrooms (joined bathroom, lavatory,toilet):

  • floor – hydro isolation and ceramic tiling;
  • walls and ceiling – finishing is not satisfied.
Bathroom equipment :

1-room apartments  - 1 steel bath,  1 wash basin, 1 toilet;

2-room apartments  - 1 steel bath, 2 wash basins, 1 toilet;

3-room apartments – 1 steel bath, 2 wash basins, 2 toilets:

  • wash sinks in the kitchen are not installed;
  • stop bathroom armature and ball valves are installed
Towel dryers:
Electric, not installed. In the bathrooms and joined bathrooms an electric socket for the dryer is installed.
Type of oven:
Electric, not installed.
Wiring:
Made of copper wire with installation of sockets and switches.
Telephone cable, TV:
Wire (connection) performed to the boards on each floor. Connection with the apartment and the interior layout not made
Heating system:

From heat generator located on the roof of another section. Two- piped dual-zoned wiring:

  • first zone – 1 – 12 floors, low wiring system,
  • second zone – 24 – 13 floors, upper wiring system.

The wires of the heating system made to every apartment of polyethylene  pipes in the floor structures.        

Type of heating device:
steel radiators
Ventilation system:
Mandatory, in the kitchen and in bathrooms wall ventilators are installed.
Each appartament on the facade of the building will have a place prepared for the insalletion of the outer block of air conditioner (bracket, screen and hole). The air conditioner is not installed.
Cold water supply:

Two-zoned.

  • Firstzone – 1 – 12 floors, with lower dilution of supply pipelines from the basement to the risers located in each apartment bathroom;
  • secondzone – 24 – 13 floors, with upper dilution of supply pipelines from the attic to the apartment risers located at the bathrooms.
Hot water supply:

From heat generator located on the roof of another section.  Dual- zoned wiring:

  • Firstzone – 1 – 12 floors with low dilution of pipelines to the apartment risers located in the bathroom of each apartment;
  • secondzone – 24 – 13 floors with upper dilution of pipelines from the attic to the apartment risers located in the bathroom of the apartments
Installment and settlement of the Counters:
  • electricity –  each apartment, located in the corridors of common use on every floor;
  • cold and hot water – each apartment;
  • heating – located on the corridors of  common use for every apartment and one built-in counter.
Finishing works on the common halls:

Elevator hall, corridors of common use and stairs:

  • stairs floor –  concrete finish;
  • corridor of common use and elevator hall floor –  ceramic tiling;
  • elevator hall walls on the 1st floor –  ceramic tiling;
  • corridor of common use and elevator hall walls at the typical floors – water resistant paint;
  • ceiling – paste whitewash;
  • entrance doors to the building – aluminum glazed;
  • interior doors –wooden;
  • windows –  wooden and metal glazing.
Embellishment:
  • exterior lighting – according to the project;
  • roads, pavements, pedestrian paths – asphalt coating and FEM coating;
  • recreation areas: active rest, playground, temporary parking for vehicles.
Attention to the investors!

1. It is forbidden to dismantle independently the constructive elements of the object, interior and exterior works and change the engineering communications.

2. During the construction process the developer has the right to add/ change elements in the design and technological solutions of the residential building that do not degrade its consumer qualities and do not lead to violation of sanitary norms.

3. The total area of the apartment is approximate; final calculations should be made according to the official data of technical inventory.